Length
To determine the length, using a steel tape measure, measure along the back of the pew seat from inside end to inside end.
If the pew has a center divider, measure each section separately from the pew end to the divider. Record the length to the nearest one eighth inch.
Width
1. When there is a small radius at the front edge, measure from the back corner of the seat to the start of the radius at the front edge.
2. When there is a large radius at the front edge, measure from the back corner of the seat to half way down the radius at the front edge.
3. Customer advises their preference.
Styles
1. 1 ½" thick high density foam padding, plain cushion, no welting on edges.
2. 2" thick high-density foam padding, plain cushion, no welting on edges.
3. 2" thick high-density foam padding with welted edges.
All Reversible Cushions have full-length zippers on back edge.
Tufted buttons are optional.
Fitted ends, Rounded corners, and Mitered cuts are also available.
Standard Fabric
Absecon Mills® Sherpa and Shire Fabrics
Fabric Number: _______
